|LEARN ELECTRIC COST STEP BY STEP|
|STEP NO. 3|
|When Program starts, the graphics
above is displayed. The Menu bar contains following options.
I. Read Me
III. Edit Item Rates
IV. Add, Edit Quantities
II X. Forms_2
IX. Master Data Sheet <MDS>
X. Load Calculation
Click the " Add, Edit Quantities " option in the MENU bar.
We will consider CPWD option only for demonstration purpose.
|Now click CPWD option. A " open file
window " will be displayed as follows.
Select File " 1 " & click open.
|A new menu will open displaying all the Chapters. Now double click " Chapter - 1 : Wiring ".|
A new window will appear as follows. This is main window which can perform the following functions.
Display all items.
Print all items.
Add your own items.
Delete any existing item.
Add Item Quantities.
One more field called " Item_ID " is given, in case you want to identify items apart from the existing Item No.
You can select any item by taking the Blue cursor to that item row or just clicking with the mouse on any item row.
Note that " Item Rate ", which we had given in previous " Edit Item Rates " option has already appeared here automatically.
|We will select the 1st item.
Enter Quantity = 100
Now Click UPDATE button.
You will see that " Cost " column will indicate 57040 for 1st item.
|Similarly you can fill in more item
quantities, which are likely to be used in this project. Always click UPDATE button to see the final
Now Click the EXIT button to leave this window.
You are back to Chapter Menu. Here you can select other sections by double clicking any section & add the item quantities of various items which you think will be required for your project.
STEP NO. 3 IS OVER.